Take a min to dilly dally. You’ve probably earned it.
A little reminder that not everything needs to be done at 100mph. This speech bubble vinyl decal is made for mirrors, windows and other smooth surfaces — perfect for adding a bit of personality to your getting-ready spot while gently encouraging you to have a wander, stare into space or forget what you walked into the room for.
Ideal for fellow dilly dalliers, chronic potterers and anyone whose five-minute task somehow became a 45-minute side quest.
Each decal is cut and weeded by hand by me at Sad Disco Club, then supplied with transfer tape ready for you to apply at home.
Choose your size:
-
Small – longest side approx. 10cm
-
Medium – longest side approx. 15cm
-
Large – longest side approx. 20cm
Available in black or white vinyl so you can choose whichever works best with your surface.
Perfect for mirrors, glass, tiles, cupboards and other clean, smooth surfaces. Please note that the decal has no background — once applied, only the vinyl design remains.
Where can I stick it?
These decals work best on clean, smooth, non-porous surfaces, including:
- Mirrors and glass
- Tiles
- Cupboards and cabinet doors
- Smooth painted furniture
- Smooth sealed surfaces
- Windows
They’re perfect for adding a little personality to bathrooms, bedrooms, kitchens, dressing tables, hallway mirrors and anywhere else that could do with being a bit less boring.
Top tip: textured, dusty, damp or heavily porous surfaces aren't vinyl's best friends, so you'll get the best result on something nice and smooth.
Important bits
- Made from permanent adhesive vinyl
- Suitable for indoor use
- Available in black or white
-
Small: longest side approx. 10cm
-
Medium: longest side approx. 15cm
-
Large: longest side approx. 20cm
- Supplied with transfer tape already applied, ready for you to install
- The decal has no background – once applied, only the design itself remains
- Each decal is cut and weeded by hand, so tiny variations may occur
- For best adhesion, apply to a clean, completely dry surface
- Please take care when applying to painted or delicate surfaces. Adhesion/removal can vary depending on the surface and finish, so test a small inconspicuous area first if you're unsure
- Decals are removable but not reusable once removed
How to apply
Make sure your surface is clean, completely dry and free from grease or dust.
Before peeling anything away, firmly rub over the entire design to make sure the vinyl is attached to the transfer tape. A squeegee works best, but the edge of a ruler or credit card works too.
Slowly peel away the backing paper, leaving the design attached to the transfer tape. Position it on your surface, press into place, then use your squeegee, ruler or credit card to firmly rub over the entire design.
Slowly peel the transfer tape back on itself. If any of the vinyl decides it isn't ready to cooperate, lay the transfer tape back down and give that area another firm rub. Sometimes the fiddly bits just need a little extra pressure and patience.
How to remove
Gently lift an edge of the vinyl and slowly peel it back from the surface. A little gentle heat from a hairdryer can help soften the adhesive if needed.
Any remaining adhesive can usually be removed with a suitable surface-safe cleaner. Take extra care with painted or delicate surfaces, as suitability can vary depending on the finish.
